High-performance materials from a single source
The right solution for every material request
Steel, nickel, titanium, aluminum and much more.

EN AW-2024: The aerospace aluminum alloy 2024 clad (WL 3.1364) and unclad (WL 3.1354) for highly stressed parts

Aluminum is typically the material of choice when high load-bearing capacity and a low weight are required: Low density, reliable corrosion resistance and thermal conductivity are key material properties in a wide range of industries. The addition of alloying elements can significantly increase the originally low strength of pure aluminum.

The aluminum alloy EN AW-2024 has excellent mechanical properties, a high resistance to mechanical stress and is used as WL 3.1364 (EN AW-2024 clad) and WL 3.1354 (EN AW-2024 unclad) in the aerospace, automotive as well as electrical industries. As an experienced metal specialist, robemetall can supply you with WL 3.1354 or WL 3.1364 quickly and in a wide variety of shapes!

EN AW-2024: Obtain the high-performance aluminum wrought alloy clad (WL 3.1364) or unclad (WL 3.1354) from a reliable partner – robemetall is your expert for materials!

Weight Calculator

EN AW-2024 clad (WL 3.1364) and unclad (WL 3.1354)

Alloy 2024 with copper as well as magnesium is an optimized variant of the EN AW-2017 alloy. Thanks to its increased strength values and mechanical resistance, EN AW-2024 is used primarily in aerospace.

Due to the contained copper, the corrosion resistance of the duralumin alloy EN AW-2024 unclad (WL 3.1354) is rather poor – thanks to the application of a higher-quality metal layer, the corrosion protection of EN AW-2024 clad (WL 3.1364) is higher.

The basic properties of EN AW-2024

  • Very high mechanical strength & good mechanical properties
  • Suitable for use at higher temperatures
  • Good weldability (resistance welding / spot-welding / electron-beam welding)
  • Suitable for brazing and cold joint
  • Good properties for cold forming
  • Weather resistant with additional coating (WL 3.1364)

Do you need an aluminum alloy with high corrosion resistance for your constructions? Contact us and we will advise you on EN AW-6061!

EN AW-2024 as WL 3.1354 and WL 3.1364 at robemetall – Customized aluminum alloys for every requirement

The standard WL 3.1354 (EN AW-2024 unclad) is recognized by the German Federal Aviation Authority as well as the German Federal Office of Defense Technology and Procurement. At robemetall you can obtain the duralumin EN AW-2024 (AlCu4Mg1) in all common temperature conditions and specifications such as:

  • QQ-A-200/3
  • QQ-A-225/6
  • QQ-A-250/4 & QQ-A-250/5
  • AMS 4035
  • AMS 4037
  • AMS 4041
  • ASTM-B-209

We keep EN AW-2024 (WL 3.1354) in stock with short term delivery in various shapes, e.g.:

  • Aluminum sheets
  • Aluminum rounds
  • Round rods
  • Aluminum blanks
  • L-, T- & U-profile as well as angle sections

In addition, we can cut EN AW-2024 (WL 3.1354 & WL 3.1364) products precisely to your individual specifications via water jet or saw cutting in our modern sawing center. On request, there is also the option to supply Alloy 2024 as metal powder.

Depending on the heat treatment, various annealing conditions and thus different properties of the aluminum alloy can be created. We offer sheets, plates, and round rods in the following specifications:

  • EN AW-2024-T0 resp. WL 3.1354-T0
  • EN AW-2024-T3 resp. WL 3.1354-T3
  • EN AW-2024-T351 resp. WL 3.1354-T351
  • EN AW-2024-T4 resp. WL 3.1354-T4
  • EN AW-2024-T6 or WL 3.1354-T6
  • EN AW-2024-T651 resp. WL 3.1354-T651
  • EN AW-2024-T8 or WL 3.1354-T8
  • EN AW-2024-T851 resp. WL 3.1354-T851

As a strong trading partner for high-performance materials, we also stock other aluminum alloys and semi-finished products such as

  • EN AW-7050 (WL 3.4144)
  • EN AW-7075 (WL 3.4364)
  • EN AW-6061 (WL 3.3214)

Benefit from our large portfolio and many years of expertise – we will gladly assist you in selecting the materials you need. Contact us directly by phone at 06033 / 92 89 90 to discuss individual requirements with our experts!

EN AW-2024 (WL 3.1354) CHEMICAL COMPOSITION IN %

Si Fe Cu Mn Mg Cr Zn Ti Ti+Zr other
0,5 0,5 3,8-4,9 0,3-0,9 1,2-1,8 0,1 0,25 0,15 0,2 0,05

EN AW-2024 (WL 3.1354) MECHANICAL PROPERTIES (SHEET AND PLATES)

Exemplary for material thickness 0.4 - 6 mm

    0,2% Yield Point [N/mm2] Tensile strength [N/mm2] Elongation at break A5 [%] Härte [HB]
T0 rolled ≤100 ≤220 12 50
T351 rolled 290 440 14 110
T42 - 260 430 15 110
T62 - 345 440 5 120
T81 rolled 400 460 5 120

EN AW-2024 (WL 3.1354) MECHANICAL PROPERTIES 3.1354 (RODS)

    0,2% Yield point [N/mm2] Tensile strength [N/mm2] Elongation at break A5 [%] Hardness [HB]
T3511 drawn 315 440 12 110
T42 - 275 430 14 110
T62 - 320 415 5 120
T8511 - 400 450 5 120
T4 extruded 340 460 10 110

EN AW-2024 clad (WL 3.1364), unclad (WL 3.1354) & much more: robemetall is your experienced metal specialist for every material requirement

With more than 35 years of industry experience, we are not just a supplier of high-performance materials – we see ourselves as the extended arm of your purchasing department. Thanks to our expertise and our comprehensive network, we can provide the right solution to every material request.

Your advantages with robemetall when purchasing high-performance materials

  • One supplier for all: robemetall not only supplies aluminum alloys such as EN AW-2024, but also aerospace steel such as 15-5 PH, titanium semi-finished products such as titanium grade 5 or special materials such as INVAR 36 in various delivery forms and according to German as well as international standards.
  • Aerospace certification according to EN 9120:2018: Our certification according to EN 9120:2018 is verified through annual audits, which makes us a suitable partner especially for companies in the aerospace industry. You can rely on our processes and quality management.
  • Professional advice: If you are ever unsure which material is best suited to your requirements, we will gladly support you with our expertise. We determine the best solution for every requirement and provide it to you at prices in line with the market.
  • Fast processing: Thanks to our elaborate stockholding, optimized logistics processes and multi-layered network, we can also react quickly to short-term material requests for EN AW-2024 (WL 3.1354 & WL 3.1364) – you will always receive your materials fast and reliably with robemetall.

Do you need EN AW-2024 in a specific delivery form or do you have questions regarding our overall offer? Contact us by phone at 06033 / 92 89 90, by e-mail or via our contact form – we are always happy to assist you!

HERE YOU CAN FIND OUT YOUR METAL WEIGHT FOR ANY QUANTITIES QUICKLY AND EASILY.

Form (* required fields)
Rundes Rohr
Flaches Rohr
Ring Rohr
Pfeil nach unten
Pfeil nach unten

Weight in Kg

*Data without guarantee. The data are based on the theoretical weight of the metals